DXF/DWG File Export

Consider the following points when exporting from VectorWorks to DXF/DWG.

Linked text in symbols export as block attributes.

Symbols, Plug-ins, Layer Links, and Groups

Symbols, plug-ins, layer links, and groups export as blocks. Exported blocks are given a generic name such as “Group-2” unless they were named in the Data tab of the Object Info palette.

Line Weights

By default, line weights are converted to the closest DXF line weight. If the color mapping option is used, mapping information is entered during export and written to a .ctb file.

Fills, Patterns, Gradients, and Hatches

Solid fills, patterns, image fills, and gradients export as DXF objects with associated solid hatch or unassociative wipeout. Wipeouts are only available in version 2000 and later. Hatches export as associative hatches to AutoCAD version 14 and higher, or as anonymous blocks to AutoCAD version 13 and lower.

Raster Images

Raster images export to the same folder that the drawing and any hatch pattern files are exported to. They export as JPEG files, with an image object in the DXF/DWG file that stores the name of the JPEG file and the insertion point. Images are only supported in AutoCAD versions 14 and higher.

Solids and NURBS Surfaces

Solids and NURBS surfaces typically export as ACIS objects. The following objects cannot be exported as ACIS objects: meshes (which export as DXF meshes), 3D polygons (which export as 3D polygons, or as triangles if filled), NURBS curves (which export as DXF splines), and walls (which export as triangulated 3D polys in 3D views, and as lines and arcs in 2D views).

Design Layers, Sheet Layers, and Viewports

VectorWorks design layer objects export as DXF model space entities. If only design layers (no sheet layers) are exported, individual design layers’ scales and views are exported to model space as one scale and view.

VectorWorks sheet layers export as DXF paper space layouts, with normal viewports exported directly and section viewports exported as blocks. Annotations become paper space objects on top of the viewports. AutoCAD requires all paper space objects to be either above or below the viewports, but not both, so any objects or annotations that appear below the viewports in VectorWorks will appear above the viewports in AutoCAD. Therefore, avoid putting anything underneath viewports in VectorWorks.

If sheet layers are exported, all design layers referenced from viewports on the sheet layers are exported to model space in top view without scaling, and viewports are created in paper space layouts to show the various views and scales. Sheets should generally look and print as expected (though without rendering modes set due to some AutoCAD bugs), but the single model space may have many overlapping objects and may not be as usable.

Since AutoCAD has only one model space, and it does not have hybrid 2D/3D objects, it is sometimes necessary for VectorWorks to export the design layers as one or more blocks with special DXF layer names to control the block visibility. For example, a design layer called “Foundation” might export as blocks named “Foundation (2D)” and “Foundation (3D),” with associated DXF layers named “_Foundation (2D)” and “_Foundation (3D).” The blocks will be inserted in model space and assigned to those DXF layers. Viewports that should hide either the 2D or 3D objects will freeze or thaw the appropriate DXF layer.

When exporting sheet layers, VectorWorks optimizes the translation for preserving the look of the sheets, at the cost of possibly adding some complexity and decreasing the ease of editing items in model space. To minimize the complexity, export sheets with unrelated design layers to separate files, or limit the drawing to one VectorWorks design layer.